Dear customer, thank you for choosing a Kepma guitar. To help you get to know your instrument better, please read this guide carefully before playing and follow the care advice below. We hope your Kepma brings you many hours of enjoyment!
- 1. A guitar is made of wood, so keep it away from heat, direct sun, rain and standing water. Never leave it in a car or its trunk: after sitting in the summer sun, the inside of a car can reach 50–70 °C.
- 2. Falls, knocks and heavy pressure can seriously damage a guitar or even destroy it. Pick it up and put it down gently and avoid contact with hard objects. When you are not playing, keep it in a gig bag or case, lying flat in a safe place.
- 3. After playing, sweat, fingerprints and dust may be left on the finish and hardware. Wipe the finish and all parts with a polishing cloth after each session. This keeps the guitar looking like new and slows oxidation and rust on the metal parts.
- 4. For long-term storage, the priority is a suitable temperature and humidity, with the guitar in its case. Whether to reduce string tension should follow the instructions for your model or advice from after-sales service. Do not treat “loosen each tuner by 1–2 turns” as a universal rule: gear ratio, string core gauge and how the string is wound all change how far the pitch drops. Slackening the strings will not prevent moisture damage or cracking, and it does not repair structural deformation.
- 5. Humidity control matters a great deal. Kepma recommends storing guitars at a relative humidity of about 40%–60% and avoiding sudden changes in temperature or humidity. Use a hygrometer to check the actual conditions; readings inside the case may differ from the room. Too much moisture can make the top swell and raise the action; too little can make the top sink, lower the action and increase the risk of cracks. Changes in action can also involve neck relief, the nut or saddle, the frets or the neck joint.
① If it is too humid, first control the storage environment. Use an appropriate amount of desiccant or a two-way humidity control product as directed, keep monitoring, and avoid drying the guitar out.
② If it is too dry, restore humidity slowly with a suitable guitar humidifier and never let liquid water touch the wood. Do not tighten the strings further to “pull the top back”.
Let the instrument settle in normal conditions before checking its geometry. The truss rod adjusts neck relief. It is not a substitute for humidity control and cannot fix structural problems in the top, bridge or neck joint. If you see cracks, a lifting bridge or action that stays abnormal, contact your dealer or after-sales service. - 6. Laminate tops usually resist humidity-related dimensional changes better than solid tops, but the neck, fingerboard, glue joints and other wooden parts of a laminate guitar still need normal care. If the action seems wrong, first check humidity, tuning, string gauge, neck relief and nut height before deciding on the cause; do not assume it is always the neck. Truss rod adjustment needs the right tool and small turns; if the resistance feels unusual, stop immediately and contact after-sales service. Sanding down the saddle permanently changes its height and may affect piezo pickup contact, string break angle and fret buzz clearance, so it should be assessed by a technician.
- 7. For everyday cleaning, a soft polishing cloth is the main tool. Any cleaner, polish or conditioning oil must be compatible with the actual finish, fingerboard material and product instructions. Satin finishes should not be polished the way gloss finishes are. Use a small amount of oil only on unsealed fingerboards or bridges where the manufacturer allows it, and wipe off any excess; a quarterly schedule is not a rule for every product, and oil should never seep into glue lines. Decide when to change strings based on corrosion, dirt, intonation, tone and how often you play; 3–6 months is only a guide, not a fixed lifespan. Always use string types and tensions approved for your guitar.
- 8. Some built-in tuners mute the pickup output while they are switched on. This is a feature of that particular circuit, not because tuning and amplification are incompatible in principle. If there is no sound when plugged in, check whether the tuner is on, the battery, the cable, the output jack and the volume settings according to the pickup’s instructions. Turn the amplifier down before connecting a cable or changing the battery, then raise the volume gradually to avoid a sudden loud sound. On some systems the output jack switches the power on, so unplug the cable after use as instructed.
Warranty Policy
1. This warranty applies only within mainland China (excluding Hong Kong, Macau and Taiwan) to wooden guitars, including acoustic and electro-acoustic guitars, produced and sold by Dongguan Qishi Kepma Guitar Factory and Hunan Kama Musical Instrument Manufacturing Co., Ltd.
2. Warranty period: the product is covered for 1 year from the date of purchase (and within 2 years of the date of manufacture).
3. In any of the following cases free warranty service is not available. Where the damage can be repaired, we or an authorized repair center will provide paid repair service.
⑴ The warranty period has expired;
⑵ Wood deformation, cracking, action changes, fret buzz or similar problems caused by improper use, care or storage (moisture, excessive dryness, sun exposure, external force, accidents, chemical contamination, rough handling, etc.);
⑶ So-called “quality defects” that are a matter of personal taste or judgment (including wood color and grain, finish color, tone and playing feel, etc.);
⑷ Faults or damage caused by disassembly, modification or improper use by the user or by a repair shop not designated by the manufacturer;
⑸ Natural fading, oxidation or rust of finishes or metal surfaces caused by the passage of time or exposure to air;
⑹ Faults or damage caused by force majeure such as fire, earthquake, wind or flood, lightning, pollution, rodents or salt;
⑺ Faults or damage caused after purchase by shipping, drops, etc.;
⑻ Consumable parts (such as strings, frets and batteries);
⑼ The model or serial number on the product does not match the actual item, or we determine that it is not genuine or is counterfeit;
⑽ The user cannot provide the original order record, receipt or invoice from an authorized dealer or other legitimate channel;
⑾ Other cases that do not qualify for warranty under the law.
4. If a fault occurs, please first read the care guide and this warranty policy. Once the fault is confirmed, contact the dealer where you bought the guitar for warranty or paid repair service. We provide dealers with the necessary assistance and technical support.
5. For warranty or paid repair, the user must provide the original order record, receipt or invoice from an authorized dealer or other legitimate channel; otherwise we cannot provide warranty or paid repair service.
6. Because products are updated over time, we reserve the right to carry out repairs using parts from the latest production batch of that product or parts of similar quality and performance.
7. Where anything in this warranty policy conflicts with applicable national laws and regulations, the laws and regulations prevail.
8. To the extent permitted by law, the company reserves the right to revise and interpret this policy.
9. Thank you for choosing a Kepma guitar. We recommend following the official Kepma WeChat account for product news. You can also use the contact page on this site to find authorized dealers or get other information.
Care Notes and Further Reading
Care and action issues should always be judged for your specific model. Our analysis of fingerboard conditioning oils explains materials and which products suit them. For how the truss rod and the nut and saddle divide the work, see Taylor: truss rod adjustments; that brand’s specific settings are not general Kepma specifications.
Demonstration: official Kepma guitar care video. Always take the actual condition of your guitar into account.


